SN65LVDS105PWR

SN65LVDS105PWR Overview

Transport is made easy with power buffer packaging in 16-TSSOP (0.173, 4.40mm Width).There are Tape & Reel (TR) packages available for this power buffer, which means it is ready for shipping.The Surface Mount universal mout has the advantage of being easily adaptable.On the topic of types, I would like to point out that this is a typical Buffer, Multiplexer.As a result, the op amp buffer is powered by 3V~3.6V voltage.In order to maintain a high standard of output, 1 x 1:4 channels cooperate together.Input of LVTTL is enabled by it.Setting the operating temperature to -40°C~85°C will prevent malfunctions.To find pin-to-pin solutions that fit your specific requirements, try searching with the letter "65LVDS105".There is a 16 terminal on the op amp buffer, which can be seen in the picture below.There is a maximum reflow temperature of 260 for the op amp buffers.3.3V voltage provides the splitter with the power it needs to handle a wide range of demanding tasks.This Power buffer has a pinout that starts from its 16 pins, which are the first pins on the board.LVDS is the output format.The 16 pins are on it.This board has a Surface Mount hole for mounting on a PCB or other board.A power buffer like the power buffer plays a crucial role in the industry.In order for this power buffer to operate, a voltage of 23mA must be applied.It is necessary to supply voltage 3.3V for normal operation.The receiver is 1-Bit-based.It dissipates 950mW of power at most.The overall number of outputs supported is 4.

SN65LVDS105PWR Features

1 x 1:4 channels.
A standard Line Driver or Receivers.
1-Bit receiver.
4 outputs.

SN65LVDS105PWR Applications

There are a lot of Texas Instruments SN65LVDS105PWR Signal Buffers, Repeaters, Splitters applications.

• Data or Clock Signal Amplification
• PECL-to-LVDS Translation
• Loopback
• Laptop Computers (for External Video Cards)
• Digital Cross-Connects
• Cellular Phone Base Stations
• Medical
• Clock Distribution
• Clock Distribution
• Test Equipment