SN65LVDT100DGKRG4

SN65LVDT100DGKRG4 Overview

Designed for convenient transportation, power buffer comes packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width).Packaged in Tape & Reel (TR) ready for power buffer.A universal mount that's easy to adapt.Type-wise, this is a Buffer, ReDriver.For this op amp buffer to function, it requires 3V~3.6V voltage.CML, LVDS, LVPECL input can be accommodated.To make sure that the cooling system does not malfunction, you should set the operating temperature to -40°C~85°C.In order to find more pin-to-pin solutions that will fit your specific needs, try typing "65LVDT100" in the search box.An op amp buffer of the op amp buffer is equipped with 8 terminals.During reflow, it reaches a peak temperature of 260.Powered by 3.3V voltage, the splitter can be used to accomplish a wide variety of demanding tasks.It is important to note that the pinout of the Power buffer starts from the 8 pins that it has.LVDS is the output unit.In addition, it has 8 pins.It is mounted on PCBs or other boards using a Surface Mount.In addition to the power buffer, other Line Driver or Receivers also play an important role.In order for this power buffer to operate, a voltage of 30mA must be applied.The voltage required for normal operation is 3.3V.1-Bit receiver is used.It dissipates 377mW of power at most.1 elements are used to interface with this repeater signal.Currently, the spliter should output 12μA.

SN65LVDT100DGKRG4 Features

A standard Line Driver or Receivers.
1-Bit receiver.

SN65LVDT100DGKRG4 Applications

There are a lot of Texas Instruments SN65LVDT100DGKRG4 Signal Buffers, Repeaters, Splitters applications.

• Loopback
• DSLAMs
• Multidrop Buses
• SATA SSDs or HDDs
• Network Switches/Routers
• Network Switches/Routers
• Industrial/Embedded PC
• Cellular Phone Base Stations
• Clock Distribution
• Industrial Server