SN65LVDT101D

SN65LVDT101D Overview

Packaged in 8-SOIC (0.154, 3.90mm Width), power buffer can be easily transported.Power buffer is ready to ship in a package of Tube.There is a universal mout that makes it easy to adapt to various situations.When we talk about types, here is a typical Buffer, ReDriver.It works on 3V~3.6V voltage.As a result, it facilitates input of CML, LVDS, LVPECL.It is recommended that the operating temperature be set to -40°C~85°C in order to prevent any malfunctions.It is possible to search with "65LVDT101" to get more pin-to-pin solutions for your special requirements if you are looking for some.An op amp buffer with 8 terminals can be found.The peak reflow temperature of it is 260.It is a splitter that can accomplish a wide range of demanding tasks with power supplied by 3.3V voltage.Pinouts start at 8 pins on the power buffer.In the output, LVPECL is used.Pins on its 8 axis are present.A Surface Mount hole is available for mounting it on a PCB or another board.Other Line Driver or Receivers like the power buffer play a important role in the industry.Voltage 61mA is needed to operate this power buffer.The operating supply voltage of 3.3V is required for normal operation.1-Bit receiver is used.Power dissipation is 481mW at most for this splitter.The splitter should operate at 50mA nominal supply current under normal circumstances.Interface repeater signal based on 1 elements.Current output from the spliter should be 12μA.

SN65LVDT101D Features

A standard Line Driver or Receivers.
1-Bit receiver.

SN65LVDT101D Applications

There are a lot of Texas Instruments SN65LVDT101D Signal Buffers, Repeaters, Splitters applications.

• Cable Repeaters
• Medical
• PECL-to-LVDS Translation
• Clock Distribution
• DSLAMs
• Communications Switchers
• Industrial/Embedded PC
• Network Switches/Routers
• Storage Area Networks
• Multidrop Buses