SN7400D

SN7400D Overview

Due to its 14-SOIC (0.154, 3.90mm Width) packaging, the part is convenient for international shipping. This packaging method provides high reliability because it uses advanced packaging techniques. A NAND Gate logic principle is used to make it work. Ensure the part's full functionality by setting the voltage to 4.75V~5.25V. Extended operating temperature around 0°C~70°C. Surface Mount is the mounting position of the part. Neither the high 400μA 16mA low state of output current is 400μA 16mA. The 7400 series contains it. There are 14 terminations totally. The part has 4 functions that significantly boost the user experience. I would like to point out that this chip is part of TTL/H/L. SN7400 can help you find device variants. An injection of 14 pins is performed into the body of the part. Many applications use this logic device with Surface Mount mounting. Please refer to the datasheets for 14 pins functions. A 2 input is supported by the part. Quiescent parts have 12mA current flowing through them. The logic device in this example is a typical Gates. Datasheets indicate that this part requires 5V power supply. Current output of the device is rated at 16mA. 1 outputs are included in the device. The operating supply voltage for the chip is specified as 5V volts, which corresponds to the chip voltage. It provides high quality logic output through its 4 channels.

SN7400D Features

NAND Gate Logic Type
Operating Temperature: 0°C~70°C
TTL/H/L Family
Quiescent Current: 12mA
Output Current: 16mA

SN7400D Applications

There are a lot of Texas Instruments SN7400D Gates and Inverters applications.

• Television
• Solar energy generation
• Island protection
• Communication
• Projector
• Car
• Grid adaptation function
• Overcurrent/Short circuit protection
• Car refrigerator
• Small ground power station