SN74ABT16374ADLRG4

SN74ABT16374ADLRG4 Overview

The flip flop is packaged in 48-BSSOP (0.295, 7.50mm Width). There is an embedded version in the package Tape & Reel (TR). Currently, the output is configured to use Tri-State, Non-Inverted. In the configuration of the trigger, Positive Edgeis used. Surface Mountis positioned in the way of this electronic part. The JK flip flop operates with an input voltage of 4.5V~5.5V volts. It is at -40°C~85°C TAdegrees Celsius that the system is operating. This D latch has the type D-Type. This type of FPGA is a part of the 74ABT series. It should not exceed 150MHzin its output frequency. D latch consists of 2 elements. Despite external influences, it consumes 2mAof quiescent current. A total of 48terminations have been recorded. The 74ABT16374family includes it. A voltage of 5V is used as the power supply for this D latch. A 3.5pFfarad input capacitance is provided by this T flip flop. It belongs to the family of electronic devices known as ABT. In this case, the electronic component is mounted in the way of Surface Mount. There are 48pins on it. Its clock edge trigger type is Positive Edge. There is a base part number FF/Latchesfor the RS flip flops. A reliable performance of this D flip flop makes it well suited for use in TR. An electrical current of 5V volts is applied to it. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. In order to achieve high efficiency, the supply voltage should be maintained at 5V. The output current of 64mA makes it feature maximum design flexibility.

SN74ABT16374ADLRG4 Features

Tape & Reel (TR) package
74ABT series
48 pins
5V power supplies

SN74ABT16374ADLRG4 Applications

There are a lot of Texas Instruments SN74ABT16374ADLRG4 Flip Flops applications.

• Test & Measurement
• Computing
• QML qualified product
• Load Control
• Patented noise
• Data storage
• Pattern generators
• Event Detectors
• Parallel data storage
• CMOS Process