SN74ABT273N

SN74ABT273N Overview

The package is in the form of 20-DIP (0.300, 7.62mm). The package Tubecontains it. T flip flop uses Non-Invertedas the output. It is configured with the trigger Positive Edge. Through Holeis occupied by this electronic component. A supply voltage of 4.5V~5.5V is required for operation. In the operating environment, the temperature is -40°C~85°C TA. This electronic flip flop is of type D-Type. In this case, it is a type of FPGA belonging to the 74ABT series. In order for it to function properly, its output frequency should not exceed 150MHz. In total, it contains 1 elements. As a result, it consumes 400μA quiescent current. Terminations are 20. You can search similar parts based on 74ABT273. A voltage of 5V is used as the power supply for this D latch. A 7pFfarad input capacitance is provided by this T flip flop. The electronic device belongs to the ABTfamily. There is an electronic part mounted in the way of Through Hole. There are 20pins on it. The clock edge trigger type for this device is Positive Edge. It is part of the FF/Latchesbase part number family. An electronic part designed with 8bits is used in this application. Due to its superior flexibility, it uses 8 circuits. The D latch runs on a voltage of 5V volts. In order to ensure high efficiency, the supply voltage should remain at 5V. This T flip flop features a maximum design flexibility due to its output current of 64mA.

SN74ABT273N Features

Tube package
74ABT series
20 pins
8 Bits
5V power supplies

SN74ABT273N Applications

There are a lot of Texas Instruments SN74ABT273N Flip Flops applications.

• Frequency Dividers
• Functionally equivalent to the MC10/100EL29
• Matched Rise and Fall
• Latch
• Latch-up performance
• Convert a momentary switch to a toggle switch
• Consumer
• Circuit Design
• Instrumentation
• Shift registers