SN74ABT374ANSR

SN74ABT374ANSR Overview

The package is in the form of 20-SOIC (0.209, 5.30mm Width). D flip flop is included in the Tape & Reel (TR)package. Tri-State, Non-Invertedis the output configured for it. JK flip flop uses Positive Edgeas the trigger. In this case, the electronic component is mounted in the way of Surface Mount. With a supply voltage of 4.5V~5.5V volts, it operates. It is operating at -40°C~85°C TA. It belongs to the type D-Typeof flip flops. It is a type of FPGA belonging to the 74ABT series. A frequency of 200MHzshould be the maximum output frequency. The list contains 1 elements. As a result, it consumes 250μA quiescent current. A total of 20 terminations have been made. The 74ABT374 family contains it. The power supply voltage is 5V. This T flip flop has a capacitance of 3.5pF farads at the input. Electronic devices of this type belong to the ABTfamily. There is an electronic part that is mounted in the way of Surface Mount. It is designed with 20 pins. This device exhibits a clock edge trigger type of Positive Edge. This device has the base part number Bus Driver/Transceiver. It is designed with a number of bits of 8. To achieve this superior flexibility, 8 circuits are used. Considering the reliability of this T flip flop, it is well suited for TR. The D latch operates on 5V volts. The flip flop has 2embedded ports. It is recommended that the supply voltage be kept at 5Vto maximize efficiency. The output current of 64mA makes it feature maximum design flexibility. In order to operate, the chip has 3 output lines.

SN74ABT374ANSR Features

Tape & Reel (TR) package
74ABT series
20 pins
8 Bits
5V power supplies

SN74ABT374ANSR Applications

There are a lot of Texas Instruments SN74ABT374ANSR Flip Flops applications.

• Count Modes
• Single Down Count-Control Line
• Bus hold
• ESCC
• Automotive
• Patented noise
• Pattern generators
• Computers
• Digital electronics systems
• Storage registers