SN74ABT574ARGYR

SN74ABT574ARGYR Overview

20-VFQFN Exposed Padis the packaging method. There is an embedded version in the package Tape & Reel (TR). Tri-State, Non-Invertedis the output configured for it. There is a trigger configured with Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. The JK flip flop operates at 4.5V~5.5Vvolts. In the operating environment, the temperature is -40°C~85°C TA. D-Typedescribes this flip flop. In terms of FPGAs, it belongs to the 74ABT series. Its output frequency should not exceed 200MHz. D latch consists of 1 elements. There is a consumption of 250μAof quiescent energy. It has been determined that there have been 20 terminations. Power is supplied from a voltage of 5V volts. The input capacitance of this T flip flop is 3.5pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. A device of this type belongs to the family of ABT. It reaches the maximum supply voltage (Vsup) at 5.5V. It is imperative that the supply voltage (Vsup) is maintained above 4.5Vin order to ensure normal operation. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.

SN74ABT574ARGYR Features

Tape & Reel (TR) package
74ABT series

SN74ABT574ARGYR Applications

There are a lot of Rochester Electronics, LLC SN74ABT574ARGYR Flip Flops applications.

• Cold spare funcion
• Data transfer
• Shift Registers
• Set-reset capability
• Instrumentation
• 2 – Bit synchronous counter
• Buffer registers
• Balanced Propagation Delays
• Communications
• Shift registers