SN74ABT821ADW

SN74ABT821ADW Overview

The package is in the form of 24-SOIC (0.295, 7.50mm Width). The package Tubecontains it. In the configuration, Tri-State, Non-Invertedis used as the output. In the configuration of the trigger, Positive Edgeis used. This electronic part is mounted in the way of Surface Mount. A voltage of 4.5V~5.5Vis required for its operation. It is operating at a temperature of -40°C~85°C TA. Logic flip flops of this type are classified as D-Type. It belongs to the 74ABTseries of FPGAs. This D flip flop should not have a frequency greater than 125MHz. A total of 1elements are contained within it. This process consumes 250μA quiescents. 24terminations have occurred. The object belongs to the 74ABT821 family. Power is provided by a 5V supply. The input capacitance of this JK flip flopis 3.5pF farads. It belongs to the family of electronic devices known as ABT. Surface Mount mounts this electronic component. This board has 24 pins. There is a clock edge trigger type of Positive Edgeon this device. It is part of the Bus Driver/Transceiverbase part number family. The flip flop is designed with 10bits. A total of 5V power supplies are needed to run it. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The supply voltage should be maintained at 5V for high efficiency. The 64mA output current allows it to be designed with the greatest amount of flexibility. To operate, the chip has a total of 3 output lines. The number of input lines is 10.

SN74ABT821ADW Features

Tube package
74ABT series
24 pins
10 Bits
5V power supplies

SN74ABT821ADW Applications

There are a lot of Texas Instruments SN74ABT821ADW Flip Flops applications.

• Bounce elimination switch
• Supports Live Insertion
• Power down protection
• Balanced Propagation Delays
• Clock pulse
• Instrumentation
• Digital electronics systems
• Latch
• Modulo – n – counter
• Data storage