SN74ABT843NT

SN74ABT843NT Overview

The 24-DIP (0.300, 7.62mm) package contains it. A package of Tube has been used. It uses Tri-State as its output configuration. There is a logic type of D-Type Transparent Latch associated with this electrical device. Mounting this electronic component follows the Through Hole method. A 4.5V~5.5V voltage supply is required for operation. There is a temperature of -40°C~85°C at which the system operates. An FPGA of this type belongs to the 74ABT series. There are 9 bits in this electronic part. As far as this device is concerned, it has no terminations. The family 74ABT843 includes it. It operates with a supply voltage of 5V. It has 24 pins that makes it easy to use. In the world of electronics, this electronic device belongs to the family of ABT. The pin configuration of the device is 24. The electronic part is mounted in a way that corresponds to Through Hole. This device has 2 ports that can be connected to it. The part is in the FF/Latches subcategory. A total of 5V power supplies are needed to run it. It features maximum flexibility in design due to 64mA output current. High efficiency requires a voltage supply of 5V. The binary equivalent of the input line is generated by 3 output lines. It consumes 24mA of quiescent current without being affected by external factors. In total, it has 1 elements. There is also WITH CLEAR AND PRESET characteristics to it.

SN74ABT843NT Features

24-DIP (0.300, 7.62mm) package
74ABT series
9 Bits
74ABT843 family
24 pin count
24 pins
5V power supplies
1 elements

SN74ABT843NT Applications

There are a lot of Texas Instruments SN74ABT843NT Latches applications.

• Programmable binary
• Counters
• PCs and Notebooks
• Avionics
• Stacked or Push-Down Registers
• Automotive Body Electronics
• Bus system register with enable parallel lines at bus side
• Audio and video switching
• Hammer
• Relay