SN74AC374NSR

SN74AC374NSR Overview

The item is packaged in 20-SOIC (0.209, 5.30mm Width)cases. Package Tape & Reel (TR)embeds it. Currently, the output is configured to use Tri-State, Non-Inverted. The trigger it is configured with uses Positive Edge. Surface Mountis in the way of this electric part. A supply voltage of 2V~6V is required for operation. -40°C~85°C TAis the operating temperature. This D latch has the type D-Type. JK flip flop is a part of the 74ACseries of FPGAs. You should not exceed 155MHzin its output frequency. D latch consists of 1 elements. As a result, it consumes 4μA quiescent current and is not affected by external forces. Terminations are 20. This D latch belongs to the family of 74AC374. A voltage of 3.3V provides power to the D latch. A JK flip flop with a 4.5pFfarad input capacitance is used here. An electronic device belonging to the family ACcan be found here. It is mounted in the way of Surface Mount. This board is designed with 20pins on it. There is a clock edge trigger type of Positive Edgeon this device. The RS flip flops belongs to FF/Latches base part number. There are 8bits in its design. It reaches 6Vwhen the maximum supply voltage (Vsup) is applied. Normally, the supply voltage (Vsup) should be kept above 2V. Using 8 circuits, it is highly flexible. As a result of its reliable performance, this T flip flop is suitable for TR. A total of 2ports are embedded in the D flip flop. With an output current of 24mA, it is possible to design the device in any way you want. Currently, there are 3 lines of input.

SN74AC374NSR Features

Tape & Reel (TR) package
74AC series
20 pins
8 Bits

SN74AC374NSR Applications

There are a lot of Texas Instruments SN74AC374NSR Flip Flops applications.

• Automotive
• Latch-up performance
• Data transfer
• CMOS Process
• Common Clocks
• High Performance Logic for test systems
• Data storage
• Clock pulse
• Memory
• Control circuits