SN74AC574DWR

SN74AC574DWR Overview

It is packaged in the way of 20-SOIC (0.295, 7.50mm Width). A package named Cut Tape (CT)includes it. This output is configured with Tri-State, Non-Inverted. This trigger is configured to use Positive Edge. Surface Mountmounts this electrical part. A 2V~6Vsupply voltage is required for it to operate. It is operating at a temperature of -40°C~85°C TA. This logic flip flop is classified as type D-Type. The 74ACseries comprises this type of FPGA. A frequency of 153MHzshould not be exceeded by its output. In total, there are 1 elements. There have been 20 terminations. If you search by 74AC574, you will find similar parts. An input voltage of 3.3Vpowers the D latch. There is 4.5pF input capacitance for this T flip flop. A device of this type belongs to the family of AC. A part of the electronic system is mounted in the way of Surface Mount. As you can see from the design, it has pins with 20. This device has the clock edge trigger type of Positive Edge. The part you are looking for is included in FF/Latches. There are 8bits in its design. Vsup reaches 6V, the maximal supply voltage. Normally, the supply voltage (Vsup) should be kept above 2V. 8 circuits are used to achieve its superior flexibility. In view of its reliability, this D flip flop is a good fit for TR. A total of 2ports are embedded in the D flip flop. Its output current of 24mAallows for maximum design flexibility. As of now, there are 3input lines. In terms of quiescent current, it consumes 4μA .

SN74AC574DWR Features

Cut Tape (CT) package
74AC series
20 pins
8 Bits

SN74AC574DWR Applications

There are a lot of Texas Instruments SN74AC574DWR Flip Flops applications.

• ESD performance
• Convert a momentary switch to a toggle switch
• Automotive
• Data transfer
• Functionally equivalent to the MC10/100EL29
• Individual Asynchronous Resets
• Modulo – n – counter
• ATE
• Data Synchronizers
• Test & Measurement