SN74AC74D

SN74AC74D Overview

The flip flop is packaged in 14-SOIC (0.154, 3.90mm Width). Package Tubeembeds it. Currently, the output is configured to use Differential. It is configured with the trigger Positive Edge. It is mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of 2V~6V volts. In the operating environment, the temperature is -40°C~85°C TA. A flip flop of this type is classified as a D-Type. In FPGA terms, D flip flop is a type of 74ACseries FPGA. It should not exceed 160MHzin terms of its output frequency. A total of 14 terminations have been made. Members of the 74AC74family make up this object. Power is provided by a 3V supply. A 3pFfarad input capacitance is provided by this T flip flop. Electronic devices of this type belong to the ACfamily. A part of the electronic system is mounted in the way of Surface Mount. There are 14pins on it. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. This part is included in FF/Latches. 6Vis the maximum supply voltage (Vsup). A normal operating voltage (Vsup) should remain above 2V. The system runs on a power supply of 3.3/5V watts. With an output current of 24mA, it is possible to design the device in any way you want. It is reported that there are 4 input lines. It consumes 2μA of quiescent current without being affected by external factors. 2 channels are available.

SN74AC74D Features

Tube package
74AC series
14 pins
3.3/5V power supplies

SN74AC74D Applications

There are a lot of Texas Instruments SN74AC74D Flip Flops applications.

• Latch
• Data Synchronizers
• EMI reduction circuitry
• Circuit Design
• Digital electronics systems
• Balanced Propagation Delays
• Clock pulse
• Test & Measurement
• Consumer
• Cold spare funcion