SN74AC74DE4

SN74AC74DE4 Overview

It is packaged in the way of SOIC. In total, there are 2 elements. The number of terminations is 14. It is powered from a supply voltage of 3V. A device of this type belongs to the family of AC. In this case, the electronic component is mounted in the way of Surface Mount. It is designed with 14 pins. The clock edge trigger type for this device is Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. Due to its reliability, this T flip flop is well suited for TUBE. It runs on 3.3/5Vvolts of power. It is reported that there are 4 input lines. There is -24mA output current at the high level. In the low level output current setting, the current is set to 24mA. Ideally, the operating temperature should be lower than 85°C. Ideally, the operating temperature should be higher than -40°C. It operates with the minimal supply voltage of 2V. There is a maximum voltage support of 6V. A frequency of 160MHzcan be achieved. It uses the logic IC D FLIP-FLOP. The T flip flop is equipped with 2functions . The JK flip flop has a pin count of 14. In addition to its maximum design flexibility, the output current of the flip flop is 24mA.

SN74AC74DE4 Features

14 pins
3.3/5V power supplies
2 Functions
14 pin count

SN74AC74DE4 Applications

There are a lot of Texas Instruments SN74AC74DE4 Flip Flops applications.

• Divide a clock signal by 2 or 4
• Data Synchronizers
• Communications
• Computing
• Common Clocks
• Test & Measurement
• Pattern generators
• Registers
• Differential Individual
• ESCC