SN74AC74PW

SN74AC74PW Overview

It is embeded in 14-TSSOP (0.173, 4.40mm Width) case. It is contained within the Tubepackage. In the configuration, Differentialis used as the output. Positive Edgeis the trigger it is configured with. This electronic part is mounted in the way of Surface Mount. A 2V~6Vsupply voltage is required for it to operate. A temperature of -40°C~85°C TAis considered to be the operating temperature. This D latch has the type D-Type. It is a type of FPGA belonging to the 74AC series. In order for it to function properly, its output frequency should not exceed 160MHz. Despite external influences, it consumes 2μAof quiescent current. A total of 14terminations have been recorded. The 74AC74 family contains this object. Power is supplied from a voltage of 3V volts. A 3pFfarad input capacitance is provided by this T flip flop. It is a member of the ACfamily of D flip flop. In this case, the electronic component is mounted in the way of Surface Mount. With its 14pins, it is designed to work with most electronic flip flops. This device has the clock edge trigger type of Positive Edge. The RS flip flops belongs to FF/Latch base part number. There is a 6Vmaximum supply voltage (Vsup). A normal operating voltage (Vsup) should remain above 2V. The superior flexibility of this circuit is achieved by using 2 circuits. A power supply of 3.3/5Vis required to operate it. This T flip flop features a maximum design flexibility due to its output current of 24mA. It is reported that there are 4 input lines.

SN74AC74PW Features

Tube package
74AC series
14 pins
3.3/5V power supplies

SN74AC74PW Applications

There are a lot of Texas Instruments SN74AC74PW Flip Flops applications.

• Matched Rise and Fall
• Pattern generators
• Storage registers
• ATE
• Data Synchronizers
• ESD protection
• Test & Measurement
• Single Down Count-Control Line
• Instrumentation
• Set-reset capability