SN74ACT374PW

SN74ACT374PW Overview

The flip flop is packaged in 20-TSSOP (0.173, 4.40mm Width). You can find it in the Tubepackage. Tri-State, Non-Invertedis the output configured for it. Positive Edgeis the trigger it is configured with. There is an electronic component mounted in the way of Surface Mount. The JK flip flop operates at 4.5V~5.5Vvolts. It is operating at -40°C~85°C TA. It belongs to the type D-Typeof flip flops. FPGAs belonging to the 74ACTseries contain this type of chip. It should not exceed 160MHzin terms of its output frequency. D latch consists of 1 elements. Despite external influences, it consumes 4μAof quiescent current. It has been determined that there have been 20 terminations. It is a member of the 74ACT374 family. Power is provided by a 5V supply. Its input capacitance is 4.5pFfarads. A device of this type belongs to the family of ACT. There is an electronic part mounted in the way of Surface Mount. This board is designed with 20pins on it. This device exhibits a clock edge trigger type of Positive Edge. The RS flip flops belongs to FF/Latches base part number. The design is based on 8bits. Due to its superior flexibility, it uses 8 circuits. The system runs on a power supply of 5V watts. The flip flop contains 2ports. In order to ensure high efficiency, the supply voltage should remain at 5V. The output current of 24mA makes it feature maximum design flexibility. It has 3lines.

SN74ACT374PW Features

Tube package
74ACT series
20 pins
8 Bits
5V power supplies

SN74ACT374PW Applications

There are a lot of Texas Instruments SN74ACT374PW Flip Flops applications.

• Patented noise
• Asynchronous counter
• Differential Individual
• CMOS Process
• Control circuits
• Dynamic threshold performance
• High Performance Logic for test systems
• Digital electronics systems
• Data storage
• Bus hold