SN74ACT564DBRE4

SN74ACT564DBRE4 Overview

The package is in the form of 20-SSOP (0.209, 5.30mm Width). It is included in the package Tape & Reel (TR). There is a Tri-State, Invertedoutput configured with it. In the configuration of the trigger, Positive Edgeis used. There is an electronic component mounted in the way of Surface Mount. The JK flip flop operates at 4.5V~5.5Vvolts. In this case, the operating temperature is -40°C~85°C TA. This electronic flip flop is of type D-Type. In FPGA terms, D flip flop is a type of 74ACTseries FPGA. You should not exceed 90MHzin the output frequency of the device. In total, it contains 1 elements. This process consumes 4μA quiescents. Terminations are 20. This D latch belongs to the family of 74ACT564. Power is supplied from a voltage of 5V volts. JK flip flop input capacitance is 4.5pF farads. Devices in the ACTfamily are electronic devices. A part of the electronic system is mounted in the way of Surface Mount. This board is designed with 20pins on it. This device has the clock edge trigger type of Positive Edge. The part is included in FF/Latches. As soon as 5.5Vis reached, Vsup reaches its maximum value. Keeping the supply voltage (Vsup) above 4.5V is necessary for normal operation. Considering its reliability, this T flip flop is well suited for TAPE AND REEL. The D latch operates on 5V volts. The flip flop contains 2ports. The output current of 24mA makes it feature maximum design flexibility. It is reported that there are 3 input lines.

SN74ACT564DBRE4 Features

Tape & Reel (TR) package
74ACT series
20 pins
5V power supplies

SN74ACT564DBRE4 Applications

There are a lot of Texas Instruments SN74ACT564DBRE4 Flip Flops applications.

• QML qualified product
• Event Detectors
• Automotive
• Data Synchronizers
• Circuit Design
• Asynchronous counter
• Instrumentation
• Memory
• Control circuits
• Single Down Count-Control Line