SN74ACT564N

SN74ACT564N Overview

It is embeded in 20-DIP (0.300, 7.62mm) case. There is an embedded version in the package Tube. This output is configured with Tri-State, Inverted. It is configured with a trigger that uses a value of Positive Edge. The electronic part is mounted in the way of Through Hole. The supply voltage is set to 4.5V~5.5V. -40°C~85°C TAis the operating temperature. It is an electronic flip flop with the type D-Type. In FPGA terms, D flip flop is a type of 74ACTseries FPGA. You should not exceed 90MHzin the output frequency of the device. A total of 1 elements are present. There is a consumption of 4μAof quiescent energy. There are 20 terminations,You can search similar parts based on 74ACT564. A voltage of 5V is used as the power supply for this D latch. There is 4.5pF input capacitance for this T flip flop. This D flip flop belongs to the family of ACT. It is mounted by the way of Through Hole. Basically, it is designed with a set of 20 pins. A Positive Edgeclock edge trigger is used in this device. This device is part of the FF/Latchesbase part number family. It is designed with 8bits. To achieve this superior flexibility, 8 circuits are used. An electrical current of 5V volts is applied to it. The flip flop contains 2ports. In order to achieve high efficiency, the supply voltage should be maintained at 5V. With a current output of 24mA , it offers maximum design flexibility. Currently, there are 3 input lines present.

SN74ACT564N Features

Tube package
74ACT series
20 pins
8 Bits
5V power supplies

SN74ACT564N Applications

There are a lot of Texas Instruments SN74ACT564N Flip Flops applications.

• Latch-up performance
• ESD performance
• Modulo – n – counter
• Matched Rise and Fall
• CMOS Process
• Control circuits
• Test & Measurement
• Pattern generators
• Buffer registers
• Functionally equivalent to the MC10/100EL29