SN74ACT7806-25DL

SN74ACT7806-25DL Overview

You will find FIFO memory chip in the 56-BSSOP (0.295, 7.50mm Width) package.In this case, it is packaged in case number Tube .There is a memory of 4.5K 256 x 18 available for storing data and applications.The temperature should be adjusted to 0°C~70°C in order to ensure reliable operation.There is Surface Mount mounting type for this FIFO memory.A voltage supply of 4.5V~5.5V is needed to operate it.The 74ACT series is represented by this memory logic.The recommended mounting way is Surface Mount .A member of the 74ACT7806 family, it has the following characteristics.With a supply voltage of 5V volts, high efficiency is possible.A total of 56 terminations can be found in FIFO means.The operation pins are 56 pins.In order for FIFO design to operate, a maximum current of 400μA is required.When setting the supply voltage to 5V , you will achieve FIFO's maximum efficiency.In FIFOs , this gadget is self-contained.ICs of type OTHER FIFO are used in the FIFO memory chip.Normally, 5V power supplies are owned by the component.The FIFO memory IC runs at a frequency of 40MHz .Through the use of 2 circuits, FIFO memory chip is able to achieve enhanced flexibility.

SN74ACT7806-25DL Features

4.5K 256 x 18 memory size
74ACT series
Best part number of 74ACT7806
FIFOs category
Clock frequency of 40MHz

SN74ACT7806-25DL Applications

There are a lot of Texas Instruments SN74ACT7806-25DL FIFOs Memory applications.

• Data-acquisition systems
• SPD for DDR3 Memory Modules
• MP3 Interface for Automobile
• GPS Offender Tracking
• Buses
• SPI Bus Flash Memory Devices
• Multi-stage synchronizer
• IP Radio
• Network bridges
• Test Equipment