SN74AHC374DW

SN74AHC374DW Overview

It is embeded in 20-SOIC (0.295, 7.50mm Width) case. There is an embedded version in the package Tube. T flip flop uses Tri-State, Non-Invertedas the output. This trigger is configured to use Positive Edge. Surface Mountis in the way of this electric part. A supply voltage of 2V~5.5V is required for operation. The operating temperature is -40°C~85°C TA. This logic flip flop is classified as type D-Type. In this case, it is a type of FPGA belonging to the 74AHC series. It should not exceed 120MHzin terms of its output frequency. The element count is 1 . It consumes 4μA of quiescent A total of 20terminations have been recorded. You can search similar parts based on 74AHC374. A voltage of 3.3V is used as the power supply for this D latch. This JK flip flop has a 4pFfarad input capacitance. Electronic devices of this type belong to the AHC/VHC/H/U/Vfamily. This electronic part is mounted in the way of Surface Mount. 20pins are included in its design. This device has the clock edge trigger type of Positive Edge. There is a base part number FF/Latchesfor the RS flip flops. This flip flop is designed with 8 Bits. As soon as Vsup reaches 5.5V, the maximum supply voltage is reached. A normal operating voltage (Vsup) should remain above 2V. Despite its superior flexibility, it relies on 8 circuits to achieve it. The D latch runs on a voltage of 2/5.5V volts. The flip flop has 2ports embedded within it. With an output current of 8mA, it is possible to design the device in any way you want. 3input lines are available for you to choose from.

SN74AHC374DW Features

Tube package
74AHC series
20 pins
8 Bits
2/5.5V power supplies

SN74AHC374DW Applications

There are a lot of Texas Instruments SN74AHC374DW Flip Flops applications.

• Load Control
• Memory
• Storage registers
• Clock pulse
• Set-reset capability
• Matched Rise and Fall
• Bounce elimination switch
• Circuit Design
• ESCC
• Buffered Clock