SN74AHC374PW

SN74AHC374PW Overview

20-TSSOP (0.173, 4.40mm Width)is the packaging method. D flip flop is included in the Tubepackage. The output it is configured with uses Tri-State, Non-Inverted. There is a trigger configured with Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. Powered by a 2V~5.5Vvolt supply, it operates as follows. In this case, the operating temperature is -40°C~85°C TA. This electronic flip flop is of type D-Type. The 74AHCseries comprises this type of FPGA. You should not exceed 120MHzin its output frequency. D latch consists of 1 elements. This process consumes 4μA quiescents. 20terminations have occurred. You can search similar parts based on 74AHC374. It is powered from a supply voltage of 3.3V. The input capacitance of this JK flip flopis 4pF farads. It is a member of the AHC/VHC/H/U/Vfamily of D flip flop. Electronic part Surface Mountis mounted in the way. As you can see from the design, it has pins with 20. This device has the clock edge trigger type of Positive Edge. The part you are looking for is included in Bus Driver/Transceiver. An electronic part designed with 8bits is used in this application. The maximal supply voltage (Vsup) reaches 5.5V. The supply voltage (Vsup) should be kept above 2V for normal operation. Its flexibility is enhanced by 8 circuits. An electrical current of 2/5.5V volts is applied to it. This flip flop has a total of 2ports. The 8mA output current allows it to be designed with the greatest amount of flexibility. This input has 3lines in it.

SN74AHC374PW Features

Tube package
74AHC series
20 pins
8 Bits
2/5.5V power supplies

SN74AHC374PW Applications

There are a lot of Texas Instruments SN74AHC374PW Flip Flops applications.

• Frequency Divider circuits
• Frequency Dividers
• Latch-up performance
• Registers
• Clock pulse
• CMOS Process
• Consumer
• Communications
• Supports Live Insertion
• Storage Registers