SN74AHC74PWR

SN74AHC74PWR Overview

It is embeded in 14-TSSOP (0.173, 4.40mm Width) case. You can find it in the Cut Tape (CT)package. As configured, the output uses Differential. The trigger configured with it uses Positive Edge. There is an electronic component mounted in the way of Surface Mount. It operates with a supply voltage of 2V~5.5V. A temperature of -40°C~125°C TAis used in the operation. It belongs to the type D-Typeof flip flops. In this case, it is a type of FPGA belonging to the 74AHC series. You should not exceed 115MHzin its output frequency. There have been 14 terminations. You can search similar parts based on 74AHC74. A voltage of 3.3V provides power to the D latch. JK flip flop input capacitance is 2pF farads. AHC/VHC/H/U/Vis the family of this D flip flop. This electronic part is mounted in the way of Surface Mount. It is designed with 14 pins. The clock edge trigger type for this device is Positive Edge. This device is part of the FF/Latchesbase part number family. The maximal supply voltage (Vsup) reaches 5.5V. For normal operation, the supply voltage (Vsup) should be kept above 2V. The superior flexibility of this circuit is achieved by using 2 circuits. Due to its reliability, this T flip flop is well suited for TR. Featuring the maximum design flexibility, it has an output current of 8mA . It has 4lines. In terms of quiescent current, it consumes 2μA .

SN74AHC74PWR Features

Cut Tape (CT) package
74AHC series
14 pins

SN74AHC74PWR Applications

There are a lot of Texas Instruments SN74AHC74PWR Flip Flops applications.

• ESD performance
• Data Synchronizers
• Frequency Dividers
• Asynchronous counter
• QML qualified product
• 2 – Bit synchronous counter
• Divide a clock signal by 2 or 4
• Balanced 24 mA output drivers
• Shift registers
• Consumer