SN74AHC74PWRG4

SN74AHC74PWRG4 Overview

The item is packaged in 14-TSSOP (0.173, 4.40mm Width)cases. Package Tape & Reel (TR)embeds it. Differentialis the output configured for it. The trigger it is configured with uses Positive Edge. It is mounted in the way of Surface Mount. A voltage of 2V~5.5Vis required for its operation. A temperature of -40°C~125°C TAis used in the operation. This logic flip flop is classified as type D-Type. It belongs to the 74AHCseries of FPGAs. You should not exceed 115MHzin the output frequency of the device. As a result, it consumes 2μA of quiescent current without being affected by external factors. In 14terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. D latch belongs to the 74AHC74 family. Power is provided by a 3.3V supply. A JK flip flop with a 2pFfarad input capacitance is used here. The electronic device belongs to the AHC/VHC/H/U/Vfamily. There is an electronic part that is mounted in the way of Surface Mount. It is designed with 14 pins. This device's clock edge trigger type is Positive Edge. The part you are looking for is included in FF/Latches. In this case, the maximum supply voltage (Vsup) reaches 5.5V. For normal operation, the supply voltage (Vsup) should be kept above 2V. The superior flexibility of this circuit is achieved by using 2 circuits. As a result of its reliable performance, this T flip flop is suitable for TR. The output current of 8mA makes it feature maximum design flexibility. This input has 4lines in it.

SN74AHC74PWRG4 Features

Tape & Reel (TR) package
74AHC series
14 pins

SN74AHC74PWRG4 Applications

There are a lot of Texas Instruments SN74AHC74PWRG4 Flip Flops applications.

• Data Synchronizers
• Common Clocks
• EMI reduction circuitry
• Synchronous counter
• Guaranteed simultaneous switching noise level
• Communications
• Consumer
• Test & Measurement
• Cold spare funcion
• Modulo – n – counter