SN74AHCT273PWR

SN74AHCT273PWR Overview

It is packaged in the way of 20-TSSOP (0.173, 4.40mm Width). The Cut Tape (CT)package contains it. The output it is configured with uses Non-Inverted. It is configured with a trigger that uses Positive Edge. Surface Mountis positioned in the way of this electronic part. A voltage of 4.5V~5.5Vis used as the supply voltage. It is at -40°C~85°C TAdegrees Celsius that the system is operating. This D latch has the type D-Type. The FPGA belongs to the 74AHCT series. It should not exceed 75MHzin its output frequency. D latch consists of 1 elements. Currently, there are 20 terminations. D latch belongs to the 74AHCT273 family. The power supply voltage is 5V. Its input capacitance is 2.5pF farads. An electronic device belonging to the family AHCT/VHCT/VTcan be found here. The electronic part is mounted in the way of Surface Mount. With its 20pins, it is designed to work with most electronic flip flops. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. The part is included in FF/Latch. An electronic part with 8bits has been designed. 8 circuits are used to achieve its superior flexibility. A reliable performance of this D flip flop makes it well suited for use in TR. It operates from 5V power supplies. High efficiency requires the supply voltage to be maintained at 5V. The number of input lines is 3. It consumes 4μA of quiescent current without being affected by external factors.

SN74AHCT273PWR Features

Cut Tape (CT) package
74AHCT series
20 pins
8 Bits
5V power supplies

SN74AHCT273PWR Applications

There are a lot of Texas Instruments SN74AHCT273PWR Flip Flops applications.

• Automotive
• Single Down Count-Control Line
• Buffer registers
• ESD protection
• Dynamic threshold performance
• Convert a momentary switch to a toggle switch
• Matched Rise and Fall
• Event Detectors
• Computing
• Buffered Clock