English

All Products

View All >>
  • SN74AHCT574DWRE4

SN74AHCT574DWRE4

8 Bit Flip Flop DUAL 20 Pins SOIC


  • Manufacturer: Texas Instruments
  • Origchip NO: 815-SN74AHCT574DWRE4
  • Package: SOIC
  • Datasheet: -
  • Stock: 410
  • Description: 8 Bit Flip Flop DUAL 20 Pins SOIC(Kg)

Purchase & Inquiry

Transport

Purchase

You may place an order without registering to Utmel.
We strongly suggest you sign in before purchasing as you can track your order in real time.

Means of Payment

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.

RFQ (Request for Quotations)

It is recommended to request for quotations to get the latest prices and inventories about the part.
Our sales will reply to your request by email within 24 hours.

IMPORTANT NOTICE

1. You'll receive an order information email in your inbox. (Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some extent, the sales manager is going to reconfirm the order and let you know if there are any updates.

Shipping Cost

Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time zone and country.

Shipping Method

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

Delivery Time

Once the goods are shipped, estimated delivery time depends on the shipping methods you chose:

FedEx International, 5-7 business days.

The following are some common countries' logistic time.
transport

Details

Tags

Parameters
Mount Surface Mount
Package / Case SOIC
Number of Pins 20
Weight 500.709277mg
Packaging Tape & Reel (TR)
JESD-609 Code e4
Moisture Sensitivity Level (MSL) 1
Number of Terminations 20
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Max Operating Temperature 125°C
Min Operating Temperature -40°C
Subcategory FF/Latches
Packing Method TAPE AND REEL
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Frequency 115MHz
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Pin Count 20
Qualification Status Not Qualified
Operating Supply Voltage 5V
Polarity Non-Inverting
Power Supplies 5V
Temperature Grade AUTOMOTIVE
Number of Circuits 8
Max Supply Voltage 5.5V
Min Supply Voltage 4.5V
Load Capacitance 50pF
Number of Ports 2
Number of Bits 8
Propagation Delay 10.6 ns
Turn On Delay Time 1 ns
Family AHCT/VHCT/VT
Logic Function D-Type, Flip-Flop
Logic IC Type BUS DRIVER
High Level Output Current -8mA
Low Level Output Current 8mA
Number of Input Lines 3
Number of Output Lines 1
Clock Edge Trigger Type Positive Edge
Height Seated (Max) 2.65mm
Width 7.5mm
RoHS Status RoHS Compliant
Lead Free Lead Free

SN74AHCT574DWRE4 Overview


The flip flop is packaged in a case of SOIC. The Tape & Reel (TR)package contains it. Terminations are 20. Power is supplied from a voltage of 5V volts. The electronic device belongs to the AHCT/VHCT/VTfamily. This electronic part is mounted in the way of Surface Mount. This board is designed with 20pins on it. This device has Positive Edgeas its clock edge trigger type. This RS flip flops is a part number FF/Latches. The design is based on 8bits. To achieve this superior flexibility, 8 circuits are used. Considering its reliability, this T flip flop is well suited for TAPE AND REEL. In order for the device to operate, it requires 5V power supplies. There are 2 ports embedded in the flip flops. It is recommended that the supply voltage be kept at 5Vto maximize efficiency. There are 1 output lines on it. A total of 3input lines have been provided. A -8mAis set for the high level output current. It is set to 8mAfor low level output current. Ideally, the operating temperature should be lower than 125°C. In order for the system to operate properly, the temperature should be higher than -40°C. In order for it to operate, a supply voltage of 4.5Vis required. There is a maximum supply voltage of 5.5V. This frequency can be achieved 115MHz. In this case, it uses a BUS DRIVER logic IC. It has 1 functions. The JK flip flop has a pin count of 20.

SN74AHCT574DWRE4 Features


Tape & Reel (TR) package
20 pins
8 Bits
5V power supplies
1 Functions
20 pin count

SN74AHCT574DWRE4 Applications


There are a lot of Texas Instruments SN74AHCT574DWRE4 Flip Flops applications.

  • Parallel data storage
  • Synchronous counter
  • Bounce elimination switch
  • Control circuits
  • Common Clocks
  • Reduced system switching noise
  • Bus hold
  • Matched Rise and Fall
  • Frequency division
  • Computing