SN74AHCT74PWR

SN74AHCT74PWR Overview

It is packaged in the way of 14-TSSOP (0.173, 4.40mm Width). The package Cut Tape (CT)contains it. It is configured with Differentialas an output. It is configured with the trigger Positive Edge. There is an electric part mounted in the way of Surface Mount. A supply voltage of 4.5V~5.5V is required for operation. -40°C~125°C TAis the operating temperature. There is D-Type type of electronic flip flop associated with this device. In this case, it is a type of FPGA belonging to the 74AHCT series. Its output frequency should not exceed 140MHz. There are 14 terminations,The 74AHCT74 family contains this object. The D flip flop is powered by a voltage of 5V . There is 2pF input capacitance for this T flip flop. The electronic device belongs to the AHCT/VHCT/VTfamily. In this case, the electronic component is mounted in the way of Surface Mount. Basically, it is designed with a set of 14 pins. This device has the clock edge trigger type of Positive Edge. The part is included in FF/Latches. 2 circuits are used to achieve its superior flexibility. Due to its reliability, this T flip flop is well suited for TR. The D latch runs on a voltage of 5V volts. If high efficiency is to be achieved, the supply voltage should be maintained at 5V. As of now, there are 4input lines. This D latch consumes 2μA quiescent current at all.

SN74AHCT74PWR Features

Cut Tape (CT) package
74AHCT series
14 pins
5V power supplies

SN74AHCT74PWR Applications

There are a lot of Texas Instruments SN74AHCT74PWR Flip Flops applications.

• Cold spare funcion
• Power down protection
• Instrumentation
• Control circuits
• Storage registers
• Single Down Count-Control Line
• Functionally equivalent to the MC10/100EL29
• Individual Asynchronous Resets
• Data storage
• Divide a clock signal by 2 or 4