SN74ALS00ADRG4

SN74ALS00ADRG4 Overview

Packed in SOIC, the part is convenient for shipping overseas. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). Total terminations are 14. A significant improvement in the user experience can be achieved by the part since it has 1 functions. The chip is part of the ALS family. A total of 14 pins are injected into the part body. This logic device is widely used in a wide variety of applications because it is Surface Mount mounted. You can find the functions of the 14 pins in the datasheets. There is Gates logic device like this in the world. It has a capacitance of 50pF when loaded. The method TR is packed into it. According to the datasheet, this part requires 5V power supplies. A logical operation through a gate of 4. It is not advisable for the device to operate in environments where the temperature is higher than 70°C. A minimal operating temperature of 0°C has been determined from test statistics. In normalsituation, users should not supply the device with voltage higher than 5.5V. There should be 4.5V voltage fed to the part below 4.5V. Performance of a part can be enhanced by adding 2 input lines. A rating of 8mA is assigned to the output current.

SN74ALS00ADRG4 Features

ALS Family
4 Gates

SN74ALS00ADRG4 Applications

There are a lot of Texas Instruments SN74ALS00ADRG4 Gates and Inverters applications.

• Residual current/leakage current protection
• Projector
• Small ground power station
• Roof distributed power station
• Electric grinding wheel
• Electricity for military and civilian life in areas without electricity
• Television
• Sewing machine
• Scanner
• Hair dryer