SN74ALS139DRG4

SN74ALS139DRG4 Overview

For the purpose of saving board space, digital switch is included in the SOIC.Tape and Reel is the packaging method.The basic configuration of this system includes 16 terminations.The multiplexer is supplied with 5V voltage.This turn signal switch has 16 component pins.As a result, conductors end at GULL WING.Single is used as its supply type.A total of 16 pins are configured on this board.The multiplexer ic is mounted in the direction of Surface Mount.The logic switch belongs to the family of ALS.There is a power supply provided for the mux switch's normal operation of 5V.Part number Decoder/Drivers indicates that the digital switch ic is an electronic part.Using a supply voltage of 5V can result in reliable performance of the multiplexers.As the signal source, there are 4 output lines.At 70°C, the maximum operating temperature of this signal switch is acceptable.In order to maintain a minimal operating temperature of the multiplexer, it should be set at 0°C.Based on the device specifications, the signal switches is designed to operate at 5.5V maximum supply voltage.According to its specifications, the digital swith requires a minimum supply voltage of 4.5V.The mux switch configuration contains 2 elements.The logic IC of the digitalswitch is OTHER DECODER/DRIVER.

SN74ALS139DRG4 Features

Supplied in the SOIC package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
4 output lines
OTHER DECODER/DRIVER as the logic IC

SN74ALS139DRG4 Applications

There are a lot of Texas Instruments SN74ALS139DRG4 Signal Switches / Multiplexers / Decoders applications.

• Steel plants
• Implementing boolean functions with multiple variables
• Electronically controlled engine system
• Electronic circuits
• Enabling block of memory depending on address in memory chips
• Arithmetic Logic Units
• To select different devices in microprocessor input
• Analog to digital conversion
• Make full adder
• Injectors