SN74ALS273DW

SN74ALS273DW Overview

It is packaged in the way of 20-SOIC (0.295, 7.50mm Width). D flip flop is included in the Tubepackage. It is configured with Non-Invertedas an output. JK flip flop uses Positive Edgeas the trigger. This electronic part is mounted in the way of Surface Mount. A voltage of 4.5V~5.5Vis required for its operation. In this case, the operating temperature is 0°C~70°C TA. The type of this D latch is D-Type. In FPGA terms, D flip flop is a type of 74ALSseries FPGA. A frequency of 35MHzshould be the maximum output frequency. A total of 1elements are present in it. During its operation, it consumes 20mA quiescent energy. A total of 20terminations have been recorded. It is a member of the 74ALS273 family. Power is provided by a 5V supply. It is a member of the ALSfamily of D flip flop. This electronic part is mounted in the way of Surface Mount. Basically, it is designed with a set of 20 pins. The clock edge trigger type for this device is Positive Edge. This part is included in FF/Latch. It is designed with 8bits. 8 circuits are used to achieve its superior flexibility. In order for the device to operate, it requires 5V power supplies. Optimal efficiency requires a supply voltage of 5V. Featuring the maximum design flexibility, it has an output current of 24mA . This input has 3lines in it.

SN74ALS273DW Features

Tube package
74ALS series
20 pins
8 Bits
5V power supplies

SN74ALS273DW Applications

There are a lot of Texas Instruments SN74ALS273DW Flip Flops applications.

• Single Up Count-Control Line
• CMOS Process
• Bus hold
• Matched Rise and Fall
• Control circuits
• Latch-up performance
• ESD protection
• Frequency Dividers
• Digital electronics systems
• Data transfer