SN74ALS29821DWRG4

SN74ALS29821DWRG4 Overview

24-SOIC (0.295, 7.50mm Width)is the packaging method. There is an embedded version in the package Tape & Reel (TR). There is a Tri-State, Non-Invertedoutput configured with it. This trigger uses the value Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 4.75V~5.25V. Currently, the operating temperature is 0°C~70°C TA. It belongs to the type D-Typeof flip flops. It belongs to the 74ALSseries of FPGAs. A total of 1elements are present in it. As a result, it consumes 115mA quiescent current and is not affected by external forces. There are 24 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. JK flip flop belongs to 74ALS29821 family. Power is supplied from a voltage of 5V volts. ALSis the family of this D flip flop. It is mounted by the way of Surface Mount. The 24pins are designed into the board. It has a clock edge trigger type of Positive Edge. The part is included in FF/Latches. 10bits are used in its design. Vsup reaches its maximum value at 5.25V. Normal operation requires a supply voltage (Vsup) above 4.75V. In view of its reliability, this D flip flop is a good fit for TAPE AND REEL. The D flip flop has no ports embedded. Its output current of 48mAallows for maximum design flexibility. It operates with 10 output lines. Additionally, you may refer to the D latch's additional POWER OFF DISABLE OUTPUTS TO PERMIT LIVE INSERTION.

SN74ALS29821DWRG4 Features

Tape & Reel (TR) package
74ALS series
24 pins
10 Bits

SN74ALS29821DWRG4 Applications

There are a lot of Texas Instruments SN74ALS29821DWRG4 Flip Flops applications.

• Set-reset capability
• Shift registers
• Balanced 24 mA output drivers
• 2 – Bit synchronous counter
• Cold spare funcion
• Differential Individual
• Reduced system switching noise
• Data transfer
• Shift Registers
• High Performance Logic for test systems