SN74ALS574BNSR

SN74ALS574BNSR Overview

The flip flop is packaged in 20-SOIC (0.209, 5.30mm Width). There is an embedded version in the package Tape & Reel (TR). As configured, the output uses Tri-State, Non-Inverted. In the configuration of the trigger, Positive Edgeis used. There is an electric part mounted in the way of Surface Mount. A voltage of 4.5V~5.5Vis required for its operation. It is at 0°C~70°C TAdegrees Celsius that the system is operating. Logic flip flops of this type are classified as D-Type. It belongs to the 74ALSseries of FPGAs. A frequency of 35MHzshould be the maximum output frequency. There are 1 elements in it. During its operation, it consumes 18mA quiescent energy. A total of 20 terminations have been made. JK flip flop belongs to 74ALS574 family. A voltage of 5V is used to power it. The electronic device belongs to the ALSfamily. The electronic part is mounted in the way of Surface Mount. It is designed with 20 pins. In this device, the clock edge trigger type is Positive Edge. This device has the base part number FF/Latches. An electronic part with 8bits has been designed. 8 circuits are used to achieve its superior flexibility. As a result of its reliable performance, this T flip flop is suitable for TR. The D latch runs on a voltage of 5V volts. The D flip flop is embedded with 2ports. For high efficiency, the supply voltage should be kept at 5V. With an output current of 24mA, this device offers maximum design flexibility. It has 3lines.

SN74ALS574BNSR Features

Tape & Reel (TR) package
74ALS series
20 pins
8 Bits
5V power supplies

SN74ALS574BNSR Applications

There are a lot of Texas Instruments SN74ALS574BNSR Flip Flops applications.

• Supports Live Insertion
• Registers
• Frequency Dividers
• Safety Clamp
• Individual Asynchronous Resets
• High Performance Logic for test systems
• QML qualified product
• Synchronous counter
• Single Up Count-Control Line
• ESD protection