SN74ALS874BNSR

SN74ALS874BNSR Overview

24-SOIC (0.209, 5.30mm Width)is the packaging method. D flip flop is embedded in the Tape & Reel (TR) package. T flip flop is configured with an output of Tri-State, Non-Inverted. JK flip flop uses Positive Edgeas the trigger. The electronic part is mounted in the way of Surface Mount. With a supply voltage of 4.5V~5.5V volts, it operates. In the operating environment, the temperature is 0°C~70°C TA. There is D-Type type of electronic flip flop associated with this device. It is a type of FPGA belonging to the 74ALS series. It should not exceed 30MHzin its output frequency. In total, there are 2 elements. Despite external influences, it consumes 21mAof quiescent current. It has been determined that there have been 24 terminations. The object belongs to the 74ALS874 family. Power is supplied from a voltage of 5V volts. This D flip flop belongs to the family of ALS. There is an electronic part that is mounted in the way of Surface Mount. The 24pins are designed into the board. A Positive Edgeclock edge trigger is used in this device. There is a base part number FF/Latchesfor the RS flip flops. It reaches 5.5Vwhen the maximum supply voltage (Vsup) is applied. Considering its reliability, this T flip flop is well suited for TAPE AND REEL. In order for the device to operate, it requires 5V power supplies. The D flip flop is embedded with 2ports. In addition to its maximum design flexibility, the output current of the T flip flop is 24mA. There are 1 output lines on it.

SN74ALS874BNSR Features

Tape & Reel (TR) package
74ALS series
24 pins
5V power supplies

SN74ALS874BNSR Applications

There are a lot of Texas Instruments SN74ALS874BNSR Flip Flops applications.

• Data transfer
• ESD protection
• ATE
• Memory
• CMOS Process
• Frequency division
• Pattern generators
• Bus hold
• Dynamic threshold performance
• Shift Registers