SN74ALS874BNT

SN74ALS874BNT Overview

It is packaged in the way of 24-DIP (0.300, 7.62mm). You can find it in the Tubepackage. This output is configured with Tri-State, Non-Inverted. The trigger configured with it uses Positive Edge. It is mounted in the way of Through Hole. With a supply voltage of 4.5V~5.5V volts, it operates. It is operating at 0°C~70°C TA. D-Typedescribes this flip flop. FPGAs belonging to the 74ALSseries contain this type of chip. A frequency of 30MHzshould be the maximum output frequency. In total, it contains 2 elements. There is 21mA quiescent consumption. There are 24 terminations,You can search similar parts based on 74ALS874. The D flip flop is powered by a voltage of 5V . In this case, the D flip flop belongs to the ALSfamily. There is an electronic part mounted in the way of Through Hole. There are 24pins on it. This device's clock edge trigger type is Positive Edge. This device has the base part number Bus Driver/Transceiver. The flip flop is designed with 8bits. An electrical current of 5V volts is applied to it. The flip flop has 2ports embedded within it. The supply voltage should be maintained at 5V for high efficiency. The output current of 24mA makes it feature maximum design flexibility. There are 1 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. Additionally, it is characterized by WITH CLEAR.

SN74ALS874BNT Features

Tube package
74ALS series
24 pins
8 Bits
5V power supplies

SN74ALS874BNT Applications

There are a lot of Texas Instruments SN74ALS874BNT Flip Flops applications.

• Count Modes
• Frequency Dividers
• Event Detectors
• Balanced Propagation Delays
• Counters
• Balanced 24 mA output drivers
• Functionally equivalent to the MC10/100EL29
• 2 – Bit synchronous counter
• Common Clocks
• Frequency division