SN74ALS992NT

SN74ALS992NT Overview

The package in which it is embedded is named 24-DIP (0.300, 7.62mm). A package of Tube has been used. It is configured with an output of Tri-State. The Logic type of this electrical device is D-Type Transparent Latch. According to Through Hole, this electronic part is mounted. A voltage of 4.5V~5.5V is used as the supply voltage for this device. It is 0°C~70°C at the operating temperature. 74ALS is the series number of this FPGA. This electronic part is designed with 9 Bits. In this device, there are 24 terminations that have been designed. The family 74ALS992 includes it. It operates with a supply voltage of 5V. 24 pins are available on it. In terms of electronic devices, this one is in the ALS family. This board has 24 pins on it, which is what it is designed for. This electronic part is mounted in the way of Through Hole. In this device, there is a total of 2 ports available for use. Subcategory FF/Latches includes this part. The system is powered by 5V sources. With 24mA, maximum design flexibility is ensured. In order to achieve high efficiency, the supply voltage should be kept at 5V. 9 output lines provide binary equivalents of input lines. Without external influences, it consumes 50mA of quiescent current. The element count is 1. It also has characteristics of WITH READ-BACK.

SN74ALS992NT Features

24-DIP (0.300, 7.62mm) package
74ALS series
9 Bits
74ALS992 family
24 pin count
24 pins
5V power supplies
1 elements

SN74ALS992NT Applications

There are a lot of Texas Instruments SN74ALS992NT Latches applications.

• Multi-line decoders
• Stacked or Push-Down Registers
• Lamp and Display (LED)
• Frequency dividing
• Data acquisition
• Digital bus buffer
• Bus system register with enable parallel lines at bus side
• Address register
• Parallel-to-Serial Data Conversion
• Sample and hold register