SN74ALVCH162820DL

SN74ALVCH162820DL Overview

In the form of 56-BSSOP (0.295, 7.50mm Width), it has been packaged. As part of the package Tube, it is embedded. T flip flop uses Tri-State, Non-Invertedas its output configuration. In the configuration of the trigger, Positive Edgeis used. There is an electrical part that is mounted in the way of Surface Mount. A voltage of 1.65V~3.6Vis used as the supply voltage. It is at -40°C~85°C TAdegrees Celsius that the system is operating. This logic flip flop is classified as type D-Type. The FPGA belongs to the 74ALVCH series. Its output frequency should not exceed 150MHz Hz. A total of 1elements are contained within it. During its operation, it consumes 40μA quiescent energy. 56terminations have occurred. JK flip flop belongs to 74ALVCH162820 family. A voltage of 1.8V provides power to the D latch. Its input capacitance is 3.5pF farads. It belongs to the family of electronic devices known as ALVC/VCX/A. There is an electronic part that is mounted in the way of Surface Mount. A total of 56pins are provided on this board. This device has the clock edge trigger type of Positive Edge. This device is part of the FF/Latchesbase part number family. To achieve this superior flexibility, 2 circuits are used. This flip flop has a total of 2ports. Its output current of 12mAallows for maximum design flexibility. There are 3 output lines on it.

SN74ALVCH162820DL Features

Tube package
74ALVCH series
56 pins

SN74ALVCH162820DL Applications

There are a lot of Texas Instruments SN74ALVCH162820DL Flip Flops applications.

• CMOS Process
• High Performance Logic for test systems
• Cold spare funcion
• Automotive
• Reduced system switching noise
• Memory
• Storage Registers
• Data storage
• Guaranteed simultaneous switching noise level
• Test & Measurement