SN74ALVCH16721DL

SN74ALVCH16721DL Overview

The item is packaged in 56-BSSOP (0.295, 7.50mm Width)cases. It is included in the package Tube. Tri-State, Non-Invertedis the output configured for it. Positive Edgeis the trigger it is configured with. There is an electric part mounted in the way of Surface Mount. A supply voltage of 1.65V~3.6V is required for operation. In the operating environment, the temperature is -40°C~85°C TA. It belongs to the type D-Typeof flip flops. It belongs to the 74ALVCHseries of FPGAs. In order for it to function properly, its output frequency should not exceed 150MHz. There is 40μA quiescent consumption. In 56terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. The 74ALVCH16721 family contains this object. A voltage of 1.8V is used to power it. There is 3.5pF input capacitance for this T flip flop. It belongs to the family of electronic devices known as ALVC/VCX/A. It is mounted by the way of Surface Mount. This board has 56 pins. In this device, the clock edge trigger type is Positive Edge. This RS flip flops is a part number FF/Latches. This flip flop has a total of 2ports. Its output current of 24mAallows for maximum design flexibility. There are 3 output lines in this JK flip flop. As of now, there are 1input lines. Additionally, you may refer to the additional WITH CLOCK ENABLE of the electronic flip flop.

SN74ALVCH16721DL Features

Tube package
74ALVCH series
56 pins

SN74ALVCH16721DL Applications

There are a lot of Texas Instruments SN74ALVCH16721DL Flip Flops applications.

• Frequency Divider circuits
• Data Synchronizers
• Count Modes
• Bus hold
• Supports Live Insertion
• Memory
• Communications
• Functionally equivalent to the MC10/100EL29
• Cold spare funcion
• Single Down Count-Control Line