SN74ALVTH16373KR

SN74ALVTH16373KR Overview

In the 56-VFBGA package, it can be found as an embedded module. Packaged in the way of Cut Tape (CT). In this configuration, the output is set to Tri-State. This electrical device has the logic type D-Type Transparent Latch. Surface Mount is used to mount this electronic part. A 2.3V~2.7V 3V~3.6V voltage supply is required for operation. There is a temperature of -40°C~85°C at which the system operates. The 74ALVTH series is associated with this FPGA. It is designed with 16 bits. This device has 56 terminations. As a member of the 74ALVTH16373 family, it falls under that category. With the supply voltage set at 2.5V, it is able to operate. 56 pins are provided. With the design of the board, there are only 56 pins. Mounting this electronic component follows the Surface Mount method. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The part is in the FF/Latches subcategory. There are 3 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. As a result of its reliable performance, it is well suited for TAPE AND REEL. 1 output lines provide binary equivalents of input lines. Aquiescent current is consumed by 3.2mA without being affected by external forces.

SN74ALVTH16373KR Features

56-VFBGA package
74ALVTH series
16 Bits
74ALVTH16373 family
56 pin count
56 pins

SN74ALVTH16373KR Applications

There are a lot of Texas Instruments SN74ALVTH16373KR Latches applications.

• Watches
• Audio and video switching
• Shift register
• Decade counting 7-segment decimal display
• Relay replacement
• Data acquisition
• Control circuits
• Storage
• Serial Output Register
• Shift right with parallel loading