SN74AS1000ADR

SN74AS1000ADR Overview

Packed in 14-SOIC (0.154, 3.90mm Width), the part is convenient for shipping overseas. In order to provide high reliability, an advanced packaging method Cut Tape (CT) is used. It works based on the NAND Gate logic principle. A voltage of 4.5V~5.5V is required for the part to function properly. Around 0°C~70°C is the extended operating temperature. The part is mounted in Surface Mount. 48mA 48mA output current is 48mA 48mA in the high or low state. It comes from the 74AS series. Total terminations are 14. There are 4 functions that significantly improve the user experience. The chip is part of the AS family. Try searching with 74AS1000 if you're looking for device variants. A total of 14 pins are injected into the part body. There are a number of applications for logic devices mounted with the Surface Mount pin. To find out what the 14 pins do, please refer to the datasheets. As of 2, the part supports 2 inputs. Parts that are quiescent have 12mA current flowing through them. The logic device shown here is a typical Gates. A load capacitance of 50pF is provided by the part. It is packed with the industry TR method. The datasheet specifies that the part requires 5V volts of power. The device's output current is rated 48mA. This device includes 1 outputs. Operation is based on 4 elements in total. The part can function from 5V.

SN74AS1000ADR Features

NAND Gate Logic Type
Operating Temperature: 0°C~70°C
AS Family
Quiescent Current: 12mA
Output Current: 48mA

SN74AS1000ADR Applications

There are a lot of Texas Instruments SN74AS1000ADR Gates and Inverters applications.

• Small ground power station
• Projector
• Reactive power compensation function
• Printer
• In-vehicle system
• Urban rail vehicle
• MPPT function (maximum power point tracking)
• CD player
• Scanner
• Hair dryer