SN74AS174DRG4

SN74AS174DRG4 Overview

16-SOIC (0.154, 3.90mm Width)is the packaging method. As part of the package Tape & Reel (TR), it is embedded. T flip flop is configured with an output of Tri-State, Non-Inverted. It is configured with the trigger Positive Edge. It is mounted in the way of Surface Mount. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. It is operating at 0°C~70°C TA. It is an electronic flip flop with the type D-Type. This type of FPGA is a part of the 74AS series. It should not exceed 100MHzin its output frequency. The element count is 1 . Despite external influences, it consumes 45mAof quiescent current. There are 16 terminations,This D latch belongs to the family of 74AS174. A voltage of 5V is used as the power supply for this D latch. An electronic device belonging to the family AScan be found here. There is an electronic part mounted in the way of Surface Mount. This board is designed with 16pins on it. Its clock edge trigger type is Positive Edge. It is part of the FF/Latchesbase part number family. An electronic part with 6bits has been designed. It reaches the maximum supply voltage (Vsup) at 5.5V. A normal operating voltage (Vsup) should remain above 4.5V. This D flip flop is well suited for TAPE AND REEL based on its reliable performance. It offers maximum design flexibility with its output current of 20mA. There are 6 output lines in this JK flip flop.

SN74AS174DRG4 Features

Tape & Reel (TR) package
74AS series
16 pins
6 Bits

SN74AS174DRG4 Applications

There are a lot of Texas Instruments SN74AS174DRG4 Flip Flops applications.

• Latch-up performance
• Shift Registers
• Pattern generators
• Bounce elimination switch
• High Performance Logic for test systems
• Supports Live Insertion
• Shift registers
• ATE
• Single Down Count-Control Line
• Parallel data storage