SN74AS4374BDWR

SN74AS4374BDWR Overview

The item is packaged in 20-SOIC (0.295, 7.50mm Width)cases. You can find it in the Tape & Reel (TR)package. Tri-State, Non-Invertedis the output configured for it. This trigger is configured to use Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. A supply voltage of 4.5V~5.5V is required for operation. It is operating at a temperature of 0°C~70°C TA. Logic flip flops of this type are classified as D-Type. In FPGA terms, D flip flop is a type of 74ASseries FPGA. In order for it to function properly, its output frequency should not exceed 125MHz. A total of 1elements are contained within it. It consumes 150mA of quiescent 20terminations have occurred. A voltage of 5V is used as the power supply for this D latch. Devices in the ASfamily are electronic devices. Vsup reaches its maximum value at 5.5V. It is imperative that the supply voltage (Vsup) is maintained above 4.5Vin order to ensure normal operation. The D flip flop is embedded with 2ports. DUAL-RANK FLIP-FLOPis also one of its characteristics.

SN74AS4374BDWR Features

Tape & Reel (TR) package
74AS series

SN74AS4374BDWR Applications

There are a lot of Rochester Electronics, LLC SN74AS4374BDWR Flip Flops applications.

• EMI reduction circuitry
• Control circuits
• Memory
• Bus hold
• Matched Rise and Fall
• ESD protection
• Parallel data storage
• Data storage
• Safety Clamp
• Dynamic threshold performance