English

All Products

View All >>
  • SN74AS574DWG4

SN74AS574DWG4

Flip Flop DUAL 20 Pins SOIC


  • Manufacturer: Texas Instruments
  • Origchip NO: 815-SN74AS574DWG4
  • Package: SOIC
  • Datasheet: -
  • Stock: 444
  • Description: Flip Flop DUAL 20 Pins SOIC(Kg)

Purchase & Inquiry

Transport

Purchase

You may place an order without registering to Utmel.
We strongly suggest you sign in before purchasing as you can track your order in real time.

Means of Payment

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.

RFQ (Request for Quotations)

It is recommended to request for quotations to get the latest prices and inventories about the part.
Our sales will reply to your request by email within 24 hours.

IMPORTANT NOTICE

1. You'll receive an order information email in your inbox. (Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some extent, the sales manager is going to reconfirm the order and let you know if there are any updates.

Shipping Cost

Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time zone and country.

Shipping Method

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

Delivery Time

Once the goods are shipped, estimated delivery time depends on the shipping methods you chose:

FedEx International, 5-7 business days.

The following are some common countries' logistic time.
transport

Details

Tags

Parameters
Mount Surface Mount
Package / Case SOIC
Number of Pins 20
Weight 500.709277mg
JESD-609 Code e4
Moisture Sensitivity Level (MSL) 1
Number of Terminations 20
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Max Operating Temperature 70°C
Min Operating Temperature 0°C
Additional Feature BROADSIDE VERSION OF 374
Subcategory FF/Latches
Packing Method TUBE
Technology TTL
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Frequency 90MHz
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Pin Count 20
Qualification Status Not Qualified
Output Type TTL
Operating Supply Voltage 5V
Number of Elements 1
Polarity Non-Inverting
Power Supplies 5V
Temperature Grade COMMERCIAL
Max Supply Voltage 5.5V
Min Supply Voltage 4.5V
Load Capacitance 50pF
Number of Ports 2
Current - Output 48mA
Propagation Delay 9 ns
Turn On Delay Time 3 ns
Family AS
Logic Function D-Type, Flip-Flop
Output Characteristics 3-STATE
Logic IC Type BUS DRIVER
Number of Bits per Element 8
High Level Output Current 48mA
Low Level Output Current 48mA
Clock Edge Trigger Type Positive Edge
Height Seated (Max) 2.65mm
Width 7.5mm
RoHS Status RoHS Compliant
Lead Free Lead Free

SN74AS574DWG4 Overview


In the form of SOIC, it has been packaged. In the configuration, TTLis used as the output. The element count is 1 . A total of 20terminations have been recorded. The D flip flop is powered by a voltage of 5V . In this case, the D flip flop belongs to the ASfamily. There is an electronic part that is mounted in the way of Surface Mount. This board has 20 pins. There is a clock edge trigger type of Positive Edgeon this device. The part you are looking for is included in FF/Latches. In light of its reliable performance, this T flip flop is well suited for TUBE. The system runs on a power supply of 5V watts. There are 2 ports embedded in the flip flops. In order to achieve high efficiency, the supply voltage should be maintained at 5V. BROADSIDE VERSION OF 374is also one of its characteristics. A 48mAis set for the high level output current. There is 48mA output current at the low level. The operating temperature should be lower than 70°C. It is recommended that the operating temperature is higher than 0°C. The minimum voltage required for operation is 4.5V. There is a maximum supply voltage of 5.5V. It is possible to achieve 90MHz frequencies. There is a logic IC BUS DRIVER used in the D flip flop. It has 1 functions. There are 20 pins on the D latch. The 48mA output current allows it to be designed with the greatest amount of flexibility.

SN74AS574DWG4 Features


20 pins
5V power supplies
1 Functions
20 pin count

SN74AS574DWG4 Applications


There are a lot of Texas Instruments SN74AS574DWG4 Flip Flops applications.

  • Asynchronous counter
  • Test & Measurement
  • Supports Live Insertion
  • Communications
  • Common Clocks
  • Data Synchronizers
  • Divide a clock signal by 2 or 4
  • Guaranteed simultaneous switching noise level
  • Matched Rise and Fall
  • Event Detectors