SN74AS576DWR

SN74AS576DWR Overview

The package is in the form of 20-SOIC (0.295, 7.50mm Width). There is an embedded version in the package Tape & Reel (TR). In the configuration, Tri-State, Invertedis used as the output. It is configured with the trigger Positive Edge. It is mounted in the way of Surface Mount. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. The operating temperature is 0°C~70°C TA. This electronic flip flop is of type D-Type. The 74ASseries comprises this type of FPGA. There should be no greater frequency than 125MHzon its output. D latch consists of 1 elements. This process consumes 125mA quiescents. A total of 20 terminations have been made. The 74AS576 family contains this object. A voltage of 5V is used to power it. This D flip flop belongs to the family of AS. This electronic part is mounted in the way of Surface Mount. Basically, it is designed with a set of 20 pins. In this device, the clock edge trigger type is Positive Edge. This device has the base part number FF/Latches. As soon as Vsup reaches 5.5V, the maximum supply voltage is reached. The supply voltage (Vsup) should be maintained above 4.5V for normal operation. In view of its reliability, this D flip flop is a good fit for TAPE AND REEL. The D latch operates on 5V volts. A total of 2ports are embedded in the D flip flop. The output current of 48mA makes it feature maximum design flexibility. It is reported that there are 3 input lines.

SN74AS576DWR Features

Tape & Reel (TR) package
74AS series
20 pins
5V power supplies

SN74AS576DWR Applications

There are a lot of Texas Instruments SN74AS576DWR Flip Flops applications.

• Data storage
• Bus hold
• Pattern generators
• Single Up Count-Control Line
• Power down protection
• Reduced system switching noise
• Frequency division
• CMOS Process
• Control circuits
• Count Modes