SN74AS823ANT

SN74AS823ANT Overview

The package is in the form of 24-DIP (0.300, 7.62mm). D flip flop is included in the Tubepackage. T flip flop uses Tri-State, Non-Invertedas the output. Positive Edgeis the trigger it is configured with. There is an electrical part that is mounted in the way of Through Hole. It operates with a supply voltage of 4.5V~5.5V. A temperature of 0°C~70°C TAis used in the operation. A flip flop of this type is classified as a D-Type. In this case, it is a type of FPGA belonging to the 74AS series. There are 1 elements in it. T flip flop consumes 80mA quiescent energy. In 24terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. The object belongs to the 74AS823 family. Power is provided by a 5V supply. An electronic device belonging to the family AScan be found here. There is an electronic part that is mounted in the way of Through Hole. As you can see from the design, it has pins with 24. This device has the clock edge trigger type of Positive Edge. The RS flip flops belongs to FF/Latches base part number. A total of 2ports are embedded in the D flip flop. It is recommended that the supply voltage be kept at 5Vto maximize efficiency. This T flip flop features a maximum design flexibility due to its output current of 48mA. Currently, there are 5 lines of input. Additionally, it is characterized by WITH CLEAR AND CLOCK ENABLE.

SN74AS823ANT Features

Tube package
74AS series
24 pins

SN74AS823ANT Applications

There are a lot of Texas Instruments SN74AS823ANT Flip Flops applications.

• Single Down Count-Control Line
• Set-reset capability
• Frequency Divider circuits
• Memory
• Computers
• Event Detectors
• Patented noise
• CMOS Process
• Circuit Design
• Pattern generators