SN74AS825ANT

SN74AS825ANT Overview

The item is packaged in 24-DIP (0.300, 7.62mm)cases. D flip flop is included in the Tubepackage. Currently, the output is configured to use Tri-State, Non-Inverted. This trigger uses the value Positive Edge. This electronic part is mounted in the way of Through Hole. The supply voltage is set to 4.5V~5.5V. In this case, the operating temperature is 0°C~70°C TA. This D latch has the type D-Type. The FPGA belongs to the 74AS series. The list contains 1 elements. As a result, it consumes 73mA of quiescent current without being affected by external factors. It has been determined that there have been 24 terminations. The object belongs to the 74AS825 family. Power is provided by a 5V supply. A device of this type belongs to the family of AS. There is an electronic part that is mounted in the way of Through Hole. As you can see from the design, it has pins with 24. A Positive Edgeclock edge trigger is used in this device. There is a base part number FF/Latchesfor the RS flip flops. It runs on 5Vvolts of power. A total of 2ports are embedded in the D flip flop. The supply voltage should be maintained at 5V for high efficiency. As a result of its output current of 48mA, it is very flexible in terms of design. The number of input lines is 5. Furthermore, it has WITH TRIPLE OUTPUT ENABLE; WITH CLEAR AND CLOCK ENABLEas a characteristic.

SN74AS825ANT Features

Tube package
74AS series
24 pins
5V power supplies

SN74AS825ANT Applications

There are a lot of Texas Instruments SN74AS825ANT Flip Flops applications.

• CMOS Process
• Memory
• Balanced Propagation Delays
• Clock pulse
• Set-reset capability
• Frequency Divider circuits
• Buffered Clock
• Computers
• High Performance Logic for test systems
• Divide a clock signal by 2 or 4