SN74BCT29821DWG4

SN74BCT29821DWG4 Overview

It is packaged in the way of 24-SOIC (0.295, 7.50mm Width). As part of the package Tube, it is embedded. Currently, the output is configured to use Tri-State, Non-Inverted. It is configured with a trigger that uses a value of Positive Edge. The electronic part is mounted in the way of Surface Mount. It operates with a supply voltage of 4.5V~5.5V. It is operating at 0°C~70°C TA. This D latch has the type D-Type. FPGAs belonging to the 74BCTseries contain this type of chip. A frequency of 125MHzshould not be exceeded by its output. The list contains 1 elements. There is 10mA quiescent consumption. Terminations are 24. The 74BCT29821family includes it. Power is provided by a 5V supply. Input capacitance of this device is 5.5pF farads. BCT/FBTis the family of this D flip flop. This electronic part is mounted in the way of Surface Mount. Basically, it is designed with a set of 24 pins. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. It is included in FF/Latches. Flip flops designed with 10bits are used in this part. As soon as 5.5Vis reached, Vsup reaches its maximum value. The supply voltage (Vsup) should be kept above 4.5V for normal operation. A power supply of 5Vis required to operate it. A D flip flop with 2embedded ports is available. In order for the chip to function, it has 10output lines.

SN74BCT29821DWG4 Features

Tube package
74BCT series
24 pins
10 Bits
5V power supplies

SN74BCT29821DWG4 Applications

There are a lot of Texas Instruments SN74BCT29821DWG4 Flip Flops applications.

• Common Clocks
• Data storage
• Patented noise
• 2 – Bit synchronous counter
• Balanced 24 mA output drivers
• Memory
• Shift registers
• Digital electronics systems
• QML qualified product
• Storage registers