SN74BCT29821NT

SN74BCT29821NT Overview

The package is in the form of 24-DIP (0.300, 7.62mm). You can find it in the Tubepackage. This output is configured with Tri-State, Non-Inverted. It is configured with the trigger Positive Edge. There is an electric part mounted in the way of Through Hole. A 4.5V~5.5Vsupply voltage is required for it to operate. Currently, the operating temperature is 0°C~70°C TA. A flip flop of this type is classified as a D-Type. The FPGA belongs to the 74BCT series. You should not exceed 125MHzin its output frequency. A total of 1elements are present in it. There is a consumption of 10mAof quiescent energy. There are 24 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. D latch belongs to the 74BCT29821 family. An input voltage of 5Vpowers the D latch. Input capacitance of this device is 5.5pF farads. It is a member of the BCT/FBTfamily of D flip flop. There is an electronic component mounted in the way of Through Hole. This board is designed with 24pins on it. The clock edge trigger type for this device is Positive Edge. It is part of the FF/Latchesbase part number family. The D latch runs on a voltage of 5V volts. A total of 2ports are embedded in the D flip flop. It is recommended that the supply voltage be kept at 5Vto maximize efficiency. With a current output of 48mA , it offers maximum design flexibility. It has 3lines.

SN74BCT29821NT Features

Tube package
74BCT series
24 pins
5V power supplies

SN74BCT29821NT Applications

There are a lot of Texas Instruments SN74BCT29821NT Flip Flops applications.

• Frequency Divider circuits
• ESD performance
• Cold spare funcion
• Functionally equivalent to the MC10/100EL29
• EMI reduction circuitry
• Patented noise
• Control circuits
• ATE
• Memory
• Data storage