SN74BCT29825DW

SN74BCT29825DW Overview

It is embeded in 24-SOIC (0.295, 7.50mm Width) case. Package Tubeembeds it. This output is configured with Tri-State, Non-Inverted. Positive Edgeis the trigger it is configured with. Surface Mountis positioned in the way of this electronic part. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. Temperature is set to 0°C~70°C TA. There is D-Type type of electronic flip flop associated with this device. It belongs to the 74BCTseries of FPGAs. A frequency of 125MHzshould not be exceeded by its output. In total, it contains 1 elements. As a result, it consumes 16mA quiescent current and is not affected by external forces. There are 24 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The power source is powered by 5V. The input capacitance of this T flip flop is 5pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. In this case, the D flip flop belongs to the BCT/FBTfamily. It reaches 5.5Vwhen the maximum supply voltage (Vsup) is applied. For normal operation, the supply voltage (Vsup) should be kept above 4.5V. There are 2 ports embedded in the flip flops. In addition, you can refer to the additinal WITH CLEAR AND CLOCK ENABLE; WITH TRIPLE OUTPUT ENABLE of the D latch.

SN74BCT29825DW Features

Tube package
74BCT series

SN74BCT29825DW Applications

There are a lot of Rochester Electronics, LLC SN74BCT29825DW Flip Flops applications.

• Shift registers
• EMI reduction circuitry
• Automotive
• Memory
• Bounce elimination switch
• Common Clocks
• Storage Registers
• Frequency Divider circuits
• Registers
• Power down protection