SN74BCT374DWRG4

SN74BCT374DWRG4 Overview

It is embeded in 20-SOIC (0.295, 7.50mm Width) case. The Tape & Reel (TR)package contains it. This output is configured with Tri-State, Non-Inverted. It is configured with a trigger that uses Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of 4.5V~5.5V volts. Temperature is set to 0°C~70°C TA. It is an electronic flip flop with the type D-Type. JK flip flop belongs to the 74BCTseries of FPGAs. In order for it to function properly, its output frequency should not exceed 70MHz. There are 1 elements in it. It consumes 5mA of quiescent A total of 20terminations have been recorded. You can search similar parts based on 74BCT374. Power is provided by a 5V supply. The input capacitance of this JK flip flopis 6pF farads. A device of this type belongs to the family of BCT/FBT. A part of the electronic system is mounted in the way of Surface Mount. As you can see from the design, it has pins with 20. This device's clock edge trigger type is Positive Edge. This RS flip flops is a part number FF/Latches. It is designed with 8bits. Vsup reaches its maximum value at 5.5V. Normal operation requires a supply voltage (Vsup) above 4.5V. In light of its reliable performance, this T flip flop is well suited for TAPE AND REEL. In order for the device to operate, it requires 5V power supplies. The D flip flop has no ports embedded. The output current of 64mA makes it feature maximum design flexibility. Currently, there are 8 input lines present.

SN74BCT374DWRG4 Features

Tape & Reel (TR) package
74BCT series
20 pins
8 Bits
5V power supplies

SN74BCT374DWRG4 Applications

There are a lot of Texas Instruments SN74BCT374DWRG4 Flip Flops applications.

• Set-reset capability
• Individual Asynchronous Resets
• Buffered Clock
• Storage registers
• Test & Measurement
• Pattern generators
• Control circuits
• ESD protection
• Asynchronous counter
• Bus hold