SN74CB3T3253PWRE4

SN74CB3T3253PWRE4 Overview

This is a relatively small item of digital switch that is included in the TSSOP in order to save space on the board.The package is packaged in the manner of Tape and Reel.The basic configuration includes 16 terminations.The multiplexer's system is powered by 2.5V voltage.This turn signal switch consists of 16 component pins.A conductor terminates at GULL WING.In this case, Single is employed as the supply type.The board has 16 pins configured.Surface Mount is the way it is mounted.Among the family of CB3T/3VT the logic switch is a member.In the signal multiplexer, there are 2 bits available.There are 4 outputs designed to operate the turn signal switch.Other Logic ICs is the classification for this the digital switch ic.It consumes 20μA current of multiplexer ic since it is not affected by external factors.The multiplexer is equipped with 8 inputs.As far as the resistance is concerned, it operates with 8Ohm.Signal switch operation at 85°C temperature is acceptable.The minimal operating temperature of the multiplexer should be maintained at -40°C.In accordance with the applicable device specifications, the signal switches operates at a maximum supply voltage of 3.6V.The digital swith is specified to operate at the minimum supply voltage of 2.3V in compliance with the applicable device specification.A logic IC based on MULTIPLEXER AND DEMUX/DECODER is employed in this system.

SN74CB3T3253PWRE4 Features

Supplied in the TSSOP package
Adopting a supply type of Single
MULTIPLEXER AND DEMUX/DECODER as the logic IC

SN74CB3T3253PWRE4 Applications

There are a lot of Texas Instruments SN74CB3T3253PWRE4 Signal Switches / Multiplexers / Decoders applications.

• Used to connect a single source to multiple destinations
• Signal router
• A robotic vehicle with the metal detector
• CPU memory location identification
• HDMI applications
• D/A converters
• Audio transmission
• PCIe
• Make half adder
• Control unit of Central Processing unit (CPU)