SN74CBT3253PW

SN74CBT3253PW Overview

This is a relatively small item of digital switch that is included in the 16-TSSOP (0.173, 4.40mm Width) in order to save space on the board.In this case, it is packaged as Tube.digital switch ic uses the method of Surface Mount for mounting.The multiplexers uses an analog IC Multiplexer/Demultiplexer as the analog part of the circuit.The operating temperature of -40°C~85°C will not be susceptible to external factors.Using a 4.5V~5.5V supply voltage provides digital controlled switch's superior flexibility for designers.With the 74CBT series, the multiplexers are suitable for a diverse range of applications.As part of its basic configuration, 16 terminations are designed as a part of it.The base part number is 74CBT3253, which is also useful when looking up signal switch's related components.The multiplexer's system is powered by 5V volts.A component pin count of 16 is found on this turn signal switch.At the end of a conductor, it uses GULL WING as the point where the conductor ends.There is a type of supply Single that is employed in this case.With 16 pins, it is configured.The multiplexer ic is mounted in the direction of Surface Mount.I would like to refer to the logic switch as a member of the CBT/FST/QS/5C/B family.In the signal multiplexer, there are 8 bits available.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 4V.It is provided that 5V has a power supply in order to function normally.As a result, the turn signal switch consists of 4 outputs.The digital switch ic is an electronic part classified into Other Logic ICs.In the absence of external influences, it consumes 3μA current of multiplexer ic.If the supply voltage is set to 5V, reliable performance of the multiplexers can be achieved.A resistance of 7Ohm is used to operate it.A total of 2 transmission channels are available in the turn signal switch's circuit.In addition, it provides improved features of TTL COMPATIBLE MUX/DMUX SWITCH.Load stability of the multiplexers can be maintained by delivering 3μA supply voltage.

SN74CBT3253PW Features

Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
TTL COMPATIBLE MUX/DMUX SWITCH
Operating with the supply current of 3μA

SN74CBT3253PW Applications

There are a lot of Texas Instruments SN74CBT3253PW Signal Switches / Multiplexers / Decoders applications.

• To select different devices in microprocessor input
• Make full adder
• CPU memory location identification
• Data bus control
• To select different task for memory in microprocessor memory systems
• Analog to digital conversion
• Electronically controlled engine system
• Solenoid cooling fan
• Automation system
• Medical industry